Process Control

1. Performs task specifically in productivity improvements, lean manufacturing practices, process controls, risk assessments on the product before rolling out for mass production as per directive from Process Engineer and Senior Process Engineer. 2. Run the engineering stage/projects, new product introductions, first article conceptual, roll-out approval stages & optimisation of the manufacturing processes in production areas based on the project given and manages multiple project with different technicians. 3. Perform direct engineering and work processes and be the domain expert in given area/processes by understanding machine/process behaviours 4. Ensure that all engineering processes flow comply OEM and aviation authority procedures 5. Troubleshoot and solve production process problems 6. Provide data for work instructions for the given processes for document control 7. Ensure processes are under as per directions from the Process Engineer 8. Work closely with the Equipment Engineers/Technicians and facilitate process improvements for NPI level and continuous improvements 9. Collect data for process capability studies for their machines/processes involved as such to improve productivity

1. Performs direct task specifically in productivity improvements, lean manufacturing practices, process controls, risk assessments on the product before rolling out for mass production as per directive from Process Technicians and Senior Process Technicians. 2. Running the engineering stage/projects, new product introductions, first article conceptual, roll-out approval stages & optimisation of the manufacturing processes in production areas based on the project given and manages multiple projects with directives from Process Technicians and Senior Process Technicians. 3. Assist and also perform direct engineering and work processes and to be the domain expert in given area/processes by understanding machine/process behaviours 4. Assist in troubleshooting and solve production process problems and escalate to higher level immediately if unsuccessful according to OCAP procedures 5. Assist to perform machine health daily qualification processes 6. Assist in making sure processes are under control as per the directions from the Process Engineer 7. Report daily machine/process health data into system or manual reporting

1. Provide manufacturing productibility knowledge and information especially on the technical guidance aspect included product/ process configuration & quality, production yield and process improvement in line with overall company KPI target. 2. Assist the section superior (Staff Engineer & Engineering Manager) in meeting the section defined objectives 3. Identify and extract information from specifications and standards, engineering drawings,etc. for manufacturing solutions 4. Support product qualification process (Tool Thermal Profile, Pre-Production Verification & First Part Qualification) 5. Coordinate and provide documentation for Equipment & Processor Qualification process 6. Prepare detailed process instruction documentation which is in line with the manufacturing requirement 7. Provide training of new introduction or revised process document to shop floor technician/person in charge 8. Develop new process set up of new product transfer and new process improvement 9. Coordinate Change Management process for changes in the manufacturing process which significantly impact on manufacturing cost & time 10. Support activities with tooling organisation to identify effective tooling and equipment for manufacturing purpose 11. Identify the appropriate hand tools, equipment and machinery to support the effectiveness of manufacturing process 12. Participate in the Corrective Action Board in validating non-conformances, identifying proper disposition and containment action 13. Support to provide engineering correction and investigation for customer complaint 14. Provide technical leadership in identifying root cause and corrective actions using problem solving tools in accordance with company procedures and guidelines 15. Support own gap analysis, development plan, and training towards improving overall organisation competency 16. Execute committed goals in Key Performance Indices (KPI) for safety, quality, value performance as well as the morale of the section 17. Perform research and analysis of effective engineering and work processes and to be the domain expert in given area/processes 18. Ensure that all engineering processes flow comply OEM and aviation authority procedures 19. Ensure processes are documented in accordance with organisational and regulatoryrequirements 20. Conduct troubleshoot and solve production process problems 21. Create/write work instructions for the given processes with proper documentation management 22. Make sure processes are under control before converting into mass production with proper room for error 23. Perform process capability studies for the machines/processes involved to improve productivity possess good statistical knowledge in terms of data handling, analysis and reporting 24. Support in Capital Expenditures (CAPEX) analysis and justification

1. Performs tasks in productivity improvements, lean manufacturing practices, process controls, and risk assessments. 2. Manages engineering stages, new product introductions, first article conceptualization, roll-out approval stages, and optimization of manufacturing processes. 3. Manages multiple projects with different technicians. 4. Performs direct engineering and work processes, understanding machine/process behaviours. 5. Troubleshoots and solves production process problems, escalates to higher level if unsuccessful. 6. Performs machine health daily qualification processes. 7. Ensures processes are under control as directed by the Process Engineer. 8. Works closely with Equipment Engineers/Technicians for process improvements. 9. Reports daily machine/process health data into the system or manually.

1. Monitors the quality of incoming and outgoing products or materials for the company/industry. 2. Monitor while the manufacturing process is done by means of measurement, and visual. 3. Identifying defects and working on parts of the production floor.

1. Tracks the development process of a product from start to finish. 2. Oversee production and test each part to ensure it meets company standards before moving to the next phase. 3. Responsible to administer the Quality Management System. If the organisation has the ISO 9001 standard, the Quality Management System (QMS) Engineer must administer, coordinate and align the ISO requirements to the Civil Aviation Requirements. 4. Test current products and identifying deficiencies 5. Suggest solutions to identified product problems 6. Investigate product quality in order to make improvements to achieve better customer satisfaction 7. Plan, create and manage the overall Quality Planning strategy 8. Collaborate with the Product Development team to ensure consistent project execution 9. Identify quality assurance process bottleneck and suggest actions for improvement 10. Oversee continuous improvement projects 11. Collect quality data 12. Identify key KPIs for product quality 13. Prepare and present reports and metrics to Senior Management 14. Assist and involved at every single PPAP / FPQ / APQP stage