Specialised Processes Methodologies (NADCAP)

1. Maintaining inspection records, quality-related documents, codes, standards, and specifications. 2. Ensures compliance with QMS, AS9100, NADCAP, and customer requirements. 3. Coordinating all activities related to Document Control procedure. 4. Inputting accurate and up-to-date document data into standard registers. 5. Generating document control reports as needed. 6. Providing controlled copies of latest approved documents and drawings to staff, subcontractors, and suppliers. 7. Maintaining updated records of approved documents and their distribution. 8. Ensuring safe custody of documents and drawings in the Document Control office.

1. Supports operations by performing the NDT inspection/process within their limitation and ensuring all NDT matter in operation or quality requirement are met. They have to ensure NDT process related to their method meets the operation requirement is in accordance with production planning projection. 2. Prepare, process and inspect aerospace and commercial parts and materials using NDT methods of fluorescent penetrant inspection (FPI) and radiography inspection (RT) and do laboratory check at the highest quality and safety standards accordance with applicable technical directives, specifications, quality standard and customer requirements. 3. Assist NDT Specialist to perform NDT task and support NDT Specialist & NDT Engineer mentoring NDT Technician and NDT Operator personnel especially in OJT 4. Participate in the development and documentation of NDT techniques or work instruction from approved general procedure 5. Control inventory of tooling & equipment of NDT Section and monitor the calibration status 6. Set up and standardise equipment, process parts, interpret and evaluate for acceptance or rejection, and documentations of result 7. Maintain record of tasks, documentation and test results in an orderly manner 8. Carry out tasks as assigned by the NDT Specialist 9. Perform general upkeep and administration of NDT Office 10. Comply with the safety, housekeeping, tool control and FOD prevention programmes and other requirements 11. Entry level supervisory role

1. Manages the non-destructive testing of aircraft engines and parts to assess their durability and functionality. 2. Determines the appropriate NDT techniques and procedures in line with relevant codes, standards, and specifications. 3. Verifies that all NDT inspections adhere to the demands of clients, original equipment manufacturers (OEM), and certifications such as EN 4179, NAS 410, and NADCAP where necessary. 4. Collaborates with maintenance and engineering personnel to analyse failures and formulates technical resolutions for structural issues and defects. 5. Performs technical reviews to ensure alignment with engineering standards and NDT protocols, while maintaining accurate records. 6. Upholds conformity with airworthiness, legal stipulations, and the organisation's safety, health, and quality frameworks. 7. Seeks out avenues for ongoing enhancement via data analysis, research, and innovation, and applies lean and eco-friendly methods to NDT operations. 8. Oversees the performance of staff and provides expert advice to NDT personnel at levels 1 and 2. 9. Is expected to offer support to the NDT team, whether remotely or on-site. 10. Must be thorough and organised in executing responsibilities, employing critical and analytical thought to detect inconsistencies, troubleshoot issues, and prevent potential hazards in maintenance procedures.

1. Administer, manage, and develop NDT Services Section capabilities. 2. Review NDT written procedures and practices. 3. Provide NDT consultancy to customers. 4. Provide guidance in establishing NDT facilities and capabilities. 5. Approve NDT techniques and procedures prepared by NDT Level II personnel. 6. Prepare for audit and surveillance of NDT facilities, procedures, records, and personnel qualification. 7. Review audit report and corrective actions on Non-Conformance Reports (NCR). 8. Liaise with airworthiness authorities and customers regarding NDT. 9. Conduct training on NDT personnel as required. 10. Conduct Level I and II examinations to European Standard EN 4179, CAAM AN 52, and NAS 410. 11. Maintain a list of NDT Level I and Level II personnel. 12. Conduct annual vision checks and maintain records. 13. Carry out all NDT tasks within the approved NDT Services Section capability. 14. Recommend and budget for acquisition of suitable equipment for NDT.

1. Lead the Quality Department. 2. Coordinate, and direct quality programmes designed to ensure that the processing of all quality products and quality assurance are consistent to the established standards. They should be well-versed in ensuring all quality standards are met, and be able to ensure that all work is manufactured compliant to the AS-9100 quality standards. 3. Oversee the daily task assignments of direct reports as well as supervise and prioritise tasks as necessary to assure schedule compliance 4. Manage and oversee all inspections of parts, investigate non-conformances, initiate, implement, and coordinate corrective and preventative actions as appropriate 5. Perform interface with inspection and manufacturing personnel on technical issues, specification requirements, inspection methods and scheduling 6. Review and approve all revisions to internal process procedures and Quality system procedures to assure that documentation meets current regulatory and customer requirements (i.e. NADCAP and AS9100) 7. Schedule and review internal and external audits to assure that any out of compliances with product, processes, or procedures are identified, documented, and corrected 8. Represent Company during all customer and regulatory audits (Quality Management Representatives) 9. Review all data obtained during all quality control and quality assurance activities to ensure consistency with company goals, policies and procedures 10. Keep management team abreast of significant issues or developments identified during quality activities and corrective/preventative actions being taken to assure continuous process improvement 11. Design and implement training programmes to all quality personnel 12. Manage on investigation of customer complaints regarding quality 13. Maintain a clean, organised and work area 14. Involvement in Quality Safety at all areas of work, including processes and product 15. Work well within a team environment

1. Oversees the application of non-destructive testing methods to evaluate the integrity of aircraft engines and parts. 2. Initiates and certifies innovative non-destructive testing methodologies and procedures. 3. Ensures that all non-destructive testing inspections meet the standards demanded by clients, the original equipment manufacturer, and relevant industry certifications such as EN 4179, NAS 410, and NADCAP where necessary. 4. Drives collaboration with workshops and engineering teams for failure investigations and recommends engineering solutions for structural flaws and defects. 5. Creates control plans for specialized processes and oversees the upkeep of equipment as well as the certification programs for operators. 6. Tracks non-destructive testing outcomes for patterns and remedial measures, and leads quality audits to ensure compliance with relevant standards and NDT requirements. 7. Examines adherence to airworthiness and regulatory mandates, advocating for improvements to the organisation's standard operating procedures, and to the health, safety, and quality frameworks. 8. Actively contributes to the development of lean and sustainability practices, and conducts research and digital innovation in NDT for continuous process improvements. 9. As a team leader, evaluates employee performance and provides mentorship and instructional support to level 1 and level 2 non-destructive testing staff. 10. Possesses the ability to collaborate across various functions, applying critical thinking, analytical skills, and problem-solving capabilities to detect irregularities and mitigate potential quality risks in maintenance processes.