Process Control Design

1. Support, maintain, test and repair a variety of instrumentation, equipment and to make sure that instruments, gauges and testing devices are calibrated correctly and give accurate readings in accordance with standard operating procedures (SOPs). They must be able to use hand tools for work requirements and interpret technical drawings and blue prints. 2. Support the calibration room set-up and maintenance activities 3. Prepare the calibration documentations in accordance with the organisation procedures, AS9100, NADCAP and customer requirements 4. Support incoming inspection of all calibration certificates and equipment received after their re-calibration or initial calibration including distribution of equipment’s to relevant user 5. Maintain inspection records, quality related updated documents, codes, standards, specification as required by the quality system 6. Record the calibration label information and update Inspection Measuring and Testing Equipment (IMTE)/Monitoring and Measuring Equipment (MME) information in system

1. Coordinate all calibration activities in the organisation from monitoring to approval, troubleshooting and act as customer focus point for any calibration items. 2. Direct communication with OEMs, equipment suppliers and calibration test houses. They are responsible to ensure all equipment are fit for their intended use without any production stoppage. 3. Plan, monitor and maintain the calibration activities according to regulatory authorities, customers and accreditation bodies 4. Plan, monitor and maintain onsite / offsite calibration work assigned 5. Review, validate & approve calibration certificate / report including analyse results, statement of conformity & interpretation and technical validity and accuracy of information 6. Responsible for all Calibration Laboratory Quality Assurance activities 7. Liaise with client and external provider on technical relevant matter whenever necessary 8. Maintain inspection records, quality related updated documents, codes, standards, specification as required by the quality system, compliance to QMS, AS9100, SAMM, NADCAP and customer requirements 9. Comply with the safety, housekeeping, tool control and prevention programmes and other requirements 10. Troubleshoot measurement problems and provide technical solutions related to calibration aspects 11. Monitor and maintain the calibration team's accreditation, and applicable training and continuous development for calibration aspect activities 12. Provide guidance/training to calibration technicians 13. Create and maintain the Calibration aspects Procedure and/or Work Instructions in line with the applicable standards and customer requirements 14. Investigate equipment non-conformances, systems and processes against the applicable standards and implement corrective action including driving relevant parties for calibration related to internal / external issues and to ensure implementation of robust corrective action 15. Support special Process, NADCAP qualification and certifications and support in maintaining the AS9100 certification 16. Provide ideas for continuous improvement to support the company on the cost reduction and saving related to calibration aspects and/or company 17. Safeguard confidentiality and impartiality of calibration activities of internal and external parties 18. Ensure the effectiveness of calibration laboratory activities 19. Ensure that all the calibration equipment and maintenances activities is well maintained 20. Manage purchasing requirements related to purchase of equipment and calibration activities 21. Ensure external providers comply with requirements and equipment

1. Should be able to maintain, test and repair a variety of instrumentation, equipment and to make sure that instruments, gauges and testing devices are calibrated correctly and give accurate readings in accordance with standard operating procedures (SOPs). They must be able to interpret technical drawings and blue prints. 2. Manage daily checks of the calibration room and the shop floor to ensure all equipment are within their calibration cycle 3. Maintain inspection records, quality related updated documents, codes, standards, specification as required by the quality system, compliance to QMS, AS9100, NADCAP and customer requirements 4. Read & interpret American Society of Testing Materials (ASTM) and International Organisation of Standardisation (ISO) standards and use information for the purpose of analysis 5. Comply with the safety, housekeeping, tool control and prevention programmes and other requirements 6. Control & monitor in and out internal/external equipment calibration expiry and due date activity 7. Prepare the calibration documentations in accordance with the organisation procedures, AS9100, ISO/IEC 17025 NADCAP and customer requirements 8. Perform incoming inspection of all calibration certificate and equipment received after their re-calibration or initial calibration including distribution of equipment to user 9. Demonstrate adherence to calibration aspects activities and carry out onsite / offsite calibration work assigned and generate calibration reports appropriately and in a timely manner for in-house calibration 10. Assist in all Laboratory Quality Assurance activities 11. Liaise with user on technical relevant matter whenever necessary 12. Ensure all record retentions activities of calibration report/certificate are carried out efficiently and to be able to provide necessary records when needed including storage of documents 13. Create purchasing information related to purchase of equipment and calibration activities 14. Ensure all the IMTE/MME information is up to date in the system

1. Able to maintain, test and repair a variety of instrumentation, equipment and to make sure that instruments, gauges and testing devices are calibrated correctly and give accurate readings in accordance with standard operating procedures (SOPs). 2. Responsible to perform routine sampling, metallurgical lab test work, and data entry/analysis. They must be able to use hand tools for work requirements and interpret technical drawings and blue prints. 3. Involvement in daily calibration activities including daily checks of the calibration room and the shop floor to ensure all equipment are within their calibration cycle 4. Maintain inspection records, quality related updated documents, codes, standards, specification as required by the quality system, compliance to QMS, AS9100, NADCAP and customer requirements 5. Carry out calibration activities according to procedure/instruction and specification by using appropriate master equipment 6. Comply with the safety, housekeeping, tool control and prevention programmes and other requirements 7. Prepare the calibration documentations in accordance with the organisation procedures, AS9100, ISO/IEC 17025, NADCAP and customer requirements 8. Perform income inspection of all calibration certificate and equipment received after their re-calibration or initial calibration 9. Assist in all Laboratory Quality Assurance activities 10. Liaise with client on technical relevant matter whenever necessary 11. Ensure all calibrated equipment affixed with the Calibration Sticker with correct information and update Inspection Measuring and Testing Equipment (IMTE) / Monitoring and Measuring Equipment (MME) information in system 12. Mentor the Calibration Lab Assistant Technician 13. Carry out record retentions activities of calibration report/certificate and to be able to provide necessary records when needed including storage of documents

1. Creating robust data pipelines to collect and integrate data from various sources, such as aircraft sensors, maintenance records, and flight operations systems. 2. Handling real-time and batch data ingestion processes to ensure continuous data flow from multiple sources into centralized data storage systems. 3. Developing and maintaining scalable, high-performance databases to store vast amounts of structured and unstructured aerospace data. 4. Ensuring that data is standardized and aggregated for meaningful insights and consistent reporting across different platforms. 5. Monitoring and ensuring the accuracy, completeness, and reliability of data throughout its lifecycle.